Foundry and forge
Melt shop to dispatch, recorded.Weighbridge, furnace, and dispatch on record.
eManage AI checks weighments at the gate, reads furnace and press run time from the machines, and counts castings at the dock. Invoices post to the GRN, and machining runs on the same job card.
For foundries and forge shops, eManage AI checks weighments from existing cameras, reads furnace and press run time from the machines, and posts purchase invoices to eManage GRNs, holding any that do not match the PO.
Furnace time
Melt hours from a log book
Furnace and hammer run time is written up after the shift.
Hand count
Castings tallied at loading
The dispatch quantity is whatever the loading register says.
Weighment
Weight taken with the driver on
A driver standing on the platform changes every weighment.
The flow
From scrap and pig iron weighment to dispatch count.One ledger watching every stage.
Today
Weighments are taken with the driver on the platform.
AI on this stage
CCTV AI →With eManage AI
Weighment allowed only once the platform is clear.
AI for foundry & forging
The modules that fit.
Plant CCTV
CCTV AI
PPE checks and short-stop tracking from your existing cameras, posted to the job card.
Agent
Document AI
Reads invoices, POs, GRNs and KYC papers, checks them, then posts to ERP or holds mismatches.
Telemetry
IIoT Edge AI
Reads machine data on a small box inside the plant, and keeps it for up to 72 hours if the internet drops.
Logistics
Warehouse Vision AI
Indoor drones count 900+ bins an hour; cameras count at the dock and read torn barcodes.
Agent
Eva AI
Ask questions in plain English and get answers from live ERP tables, within your login rights.
Agent
SOP AI
Plant agents that answer from your SOPs, recipes and work instructions, each limited to its own files.
Demo clips
Watch it count.
Unloading count
Castings counted one by one as they come off the truck and into stock.
Weighbridge · driver off the deck
Weighment is allowed only after the driver leaves the platform. A driver standing on it blocks the weighment.
Questions engineering plantsactually ask.
Yes. A camera at the dock counts castings one by one as they are carried on or off the truck, and the count posts to eManage.
Not as a trained document type. Document AI handles invoices, POs, transporter documents, bank statements, and KYC packs. Anything else goes to a review queue, and certificates stay on the ERP record.
It posts nothing. Quantity, rate, tax, or HSN differences go to a hold queue with the original image.
No. It uses an existing IP camera over the platform.
More in engineering
What could your plantrun better?
A feasibility audit maps the cameras, machines and eManage modules you already run, then picks one place to go live.
Book a feasibility audit →