Textile · fibre to dispatch
One mill, one ledger.From bale and yarn lot to roll and carton.
eManage AI plugs into the eManage ERP that spinning, knitting, weaving, dyeing and garment units already run on. Machines, cameras and documents write to the lot, roll ID and bundle card while the shift is still on.
eManage AI adds machine monitoring, fabric inspection, camera counts and document reading to eManage textile ERP. Spindle, loom and knit-cell data, roll grades, roll counts and GST invoices post to the same lot and roll ID records the mill already uses.
Shift reports
Written after the shift
Loom and spindle readings reach the ERP a day late, typed from a register.
Shade claims
Defects found by the buyer
Holes, slubs and shade drift slip past manual inspection and come back as claims.
Godown counts
Rolls that are not where the ERP says
Rolls and cartons move faster than anyone posts them against the lot.
The flow
From spinning to godown & dispatch.One ledger watching every stage.
Today
Spindle stops and count changes are logged by hand.
AI on this stage
IIoT Edge AI →With eManage AI
Ring frame readings become simple machine averages.
Textile sectors
Pick your part of textile.
AI for textile
The modules that fit.
Vision
Fabric Inspection AI
Line-scan cameras grade fabric rolls on the 4-point system at up to 30 metres a minute.
Logistics
Warehouse Vision AI
Indoor drones count 900+ bins an hour; cameras count at the dock and read torn barcodes.
Agent
Document AI
Reads invoices, POs, GRNs and KYC papers, checks them, then posts to ERP or holds mismatches.
Telemetry
IIoT Edge AI
Reads machine data on a small box inside the plant, and keeps it for up to 72 hours if the internet drops.
Demo clips
Watch it count.
Fabric roll count
Each roll counted off the truck and again as it lands on the stock pile.
Packing count
Every garment counted as it goes into the carton.
Weighbridge · driver off the deck
Weighment is allowed only after the driver leaves the platform. A driver standing on it blocks the weighment.
Questions textile plantsactually ask.
No. eManage AI is built for eManage ERP. Its modules write to the lots, roll IDs, job cards and bundle cards the mill already uses.
Spinning, knitting, weaving, dyeing and processing, and garment units. Each segment uses the modules that fit its machines and documents.
No. A small box reads the existing machine controllers, counters or clip-on sensors. Machine settings stay as they are.
The box in the plant keeps working and keeps up to 72 hours of data. When the internet returns, alarms go first, then the rest.
What could your plantrun better?
A feasibility audit maps the cameras, machines and eManage modules you already run, then picks one place to go live.
Book a feasibility audit →